Kayliss Design can produce your online web presence or printing needs with eye catching flair.

Kayliss Design now offers Metal Art cut from a CNC Laser Machine.

When we were first introduced to this method of artwork we were

instantly intrigued.

This machine cuts very fine artwork with a laser cutter run by a computer from usually a 1/8" thick sheet of steel for this type of art.

We can do general clipart offered, or you can supply us with a silhouette capable photograph to make your own personalized presentation.

Once the artwork is cut from the machine it is cleaned, primed and painted whatever colour you choose (glossy or flat,) or powdercoated, whatever colour you choose (glossy or flat,).

You may ask for brackets to hang it or we can drill holes for screwing it into the wall or attach posts for mounting in the earth, whatever you want to mount it on.

Luckily we have a 1st class fitter/welder on the premises to do the finishing touches.

This art is not just limited to signs and wallhangings. You can get designs done that you may put on tops of coffee tables (maybe put glass over it) or in doors of cabinets and even gates can be made with your own design added to punch it up...

it is limitless what can be done.

Here are some samples of what we have done. (See the 'Metal Art Ideas' page for other ideas) You decide the size, whether a wall hanging or an actual sign for the end of your driveway or in your garden. You can paint it different colours with Metal Paint to make it look more personal if you like, after you get it home.

Remember, this is steel, so after time outside in the elements it may oxidize

and you might have to retouch it.

Kept in your house, it should be fine for years.

(due to copywrite issues, the photos below cannot be enlarged)

From this clipart, to the fresh cut 1/8" steel, to the cleaned and painted for the garden. Two 'stakes' were welded to the bottom to anchor it. This is 3 feet tall.

From this photo to a 1/8" thick steel flat black silhouette with brackets to keep it away from the surface and they could be painted to match the background

it is put on.  Gone to Quebec.

All photos and artwork on this page are Copywrited by Kayliss Design.

Click here to see  more ideas of what can be done.

From this photo to a 1/8" thick steel flat black silhouette with screw holes.

Gone to Quebec.

This item was designed as a donation for a

'Dog Walkathon'

to be included in their Silent Auction to raise money for sick and injured animals in our area.

From this photo to a 1/8" thick steel flat black silhouette . Gone to Scotland.

This sign (metal part) is 32" wide and the tractor is set off from the main sign, "2-D".

(You can see the shadow

of the tractor)

Painted with glossy black and red.

It is mounted on both sides of the sign for the end of the driveway. The owner built the cedar base with copper caps on the posts and copper piping for the emergency number.

From this photo to a 1/8" thick,  glossy creme silhouette for a deck railing as there are many hummingbird fights and swoops for the feeders.

Two brackets for mounting.

These signs were made for a Masonic lodge in a

2-D effect.

The top sign is 1/8" thick painted glossy black with a bracket for mounting.

The bottom sign is a 3/16" thick x 59" long bar painted glossy gold with a glossy black top bar.

These three pieces were made as garden art, all designed by Kayliss Design.

Cat on stump,

Owl on post,

Woodpecker

all 12 to 18" tall

These pieces were made for garden art but from artwork on hand.

Jackalope and Racoon.

This sign is 24" H x 34" W

1/8" steel cut from the laser machine, then sandblasted and powdercoated with 5 screw holes for mounting.

1" posts are installed to raise the black bar and allow the colour to show and shadows to emerge through the lettering.